We operate six bulk grain export terminals strategically located along South Australia’s coastline, providing efficient access to global markets for export customers.
Our ports support a range of vessel sizes, enabling customers to optimise shipping pathways and manage export volumes effectively.
For shipping enquiries, please contact us.
Shipping reports
Long term capacity and other
Shipper documents
Vessel booking forms
The port of Thevenard is 793 kilometres west of Adelaide and 3 kilometres from the centre of Ceduna.
| Ship loader type |
1 travelling gantry with retractable boom and spout attached No trimming heads available Spout trimming only |
| Number of belts | 1 |
| Number of spouts | 1 |
| Air draft | 14m |
| Indicative loading rate | 1000 tonnes/hour |
Port Lincoln is situated at the southern tip of Eyre Peninsula, 682 km from Adelaide by road and 280km west by air. A natural deep water harbour makes Port Lincoln attractive to large bulk grain carriers for topping up loads from shallow ports in South Australia and Victoria.
| Ship loader type |
2 travelling gantry loaders Spout trimming only |
| Number of belts | 2 |
| Number of spouts | 2 |
| Air draft | 22.3m |
| Indicative loading rate | 3000 tonnes/hour |
The port of Wallaroo is situated on the eastern side of Spencer Gulf, 160km by road and 197 nautical miles from Adelaide.
| Ship loader type |
5 identical slewing loading booms with spouts attached (operate 2 at a time) Spout trimming only |
| Number of belts | 1 |
| Number of spouts | 5 |
| Air draft | 12.9m |
| Indicative loading rate | 800 tonnes/hour |
Port Giles features a deep-water berth, situated on the eastern side of Yorke Peninsula, 217km by road and 35 nautical miles from Adelaide.
| Ship loader type |
5 identical slewing loading booms with spouts attached No trimming heads available Spout trimming only |
| Number of belts | 1 |
| Number of spouts | 5 |
| Air draft | 15.5m |
| Indicative loading rate | 1000 tonnes/hour |
Situated near the mouth of the Port River, Outer Harbor is 11km downstream of the Inner Harbour grain berth. Outer Harbor was custom-built on the deep-water berth to allow larger vessels to load.
| Ship loader type |
Cleveland cascade chute travelling loader Trimming head attached to loader when hold trimming |
| Number of belts | 1 |
| Number of spouts | 1 |
| Air draft | 24.4m |
| Indicative loading rate | 2200 tonnes/hour |
Inner Harbour grain berth is situated on the Port River, 11km upstream of Outer Harbor.
| Ship loader type |
1 travelling gantry loader Spout trimming only |
| Number of belts | 1 |
| Number of spouts | 1 |
| Air draft | 14.7m |
| Indicative loading rate | 800 tonnes/hour |
Navigational restrictions may apply to some larger vessels. See Inner Harbour’s berth details and restrictions.
Find out more about our port terminals
© 2026 Bunge.
